Your 1967-1981 Camaro's J-nuts on the front leaf spring cup are constantly exposed to adverse weather conditions, meaning they usually end up so rusted that the spring mount bolts will strip out the threads on the bolt, or even break the…
This is a quality OER® reproduction nut which is used to mount the leaf spring front eye bracket.
Sold as a 6 piece kit.
Applications:
1973-74 Buick Apollo
1975-79 Buick Skylark
1967-81 Chevrolet Cam aro
1968-79…
Secure your suspension system with this Replacement Leaf Spring Front Eye Bushing Mounting Hardware. Designed to provide a snug fit, this hardware ensures proper installation and long-lasting performance.
This bolt passes through the…
Stock Replacement Correct Black Oxide Plating Stronger Than Imported Reproductions 6 Hex Bolts With Captured Washer 6 J-Nuts per Set Great stock replacement for J-nuts & Bolts in the body of the Firebird used to hold the front leaf…
Anchor Plate Only.
Reproduction rear spring shock anchor plate which is required on 1970-81 models equipped with multi leaf rear springs. This plate is located below the rear leaf spring and holds the spring and shock in…
Reproduction Of Original For Vehicles Equipped With Multi-Leaf Springs Installs Below Leaf Springs To Hold Spring and Shock Absorber In Place Left Or Right
…
Stock Replacement Correct Black Oxide Plating Stronger Than Imported Reproductions (6) Hex Bolts With Captured Washer (6) J-Nuts per Set One Set Required Per Car Great stock replacement for J-nuts in the body of the Camaro used to hold the…
Replace your rear leaf spring upper pads when installing a new rear leaf springs! Each pad is used to insulate the area between the rear leaf spring and the axle tube mounting plate.
.
Sold individually. 2 required per vehicle.
…
New leaf spring strap clamps with rivets and plastic silencer pads. Set refurbishes original style Camaro 5 leaf rear springs used on various Camaro models.
…
OE Style Quality Replacement Correct Black Oxide Plating Stronger Than Imported Reproductions 6 J-nuts Per Set One Set Required Per Car Correct Bolt Set Available Separately as our Part # 75-11578 A Firebird leaf spring front mounting…
Mono-leaf rears use four T-bolts per side. Reproduction correct length T-bolt. 10 Bolt rears use eight T-Bolts. 12 bolt rears use four T-bolts and two U bolts. (Note: Racers may use four U-bolts for added strength).…
Replace your cracked, shrunken or worn out shackle bushings and bring your rear suspension back to original factory ride specifications. We recommend replacing both upper and lower bushings. Sold individually. 8 required per vehicle. …
New leaf spring strap clamps with rivets and plastic silencer pads. Set refurbishes original style Camaro 4 leaf rear springs used on Z-28 some big block applications.
…
Reproduction Of Original BM Code Color Is A Foil Silver This Camaro reproduction leaf sping tape decal has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the quality and…
New leaf spring strap clamps with rivets and plastic silencer pads. Set refurbishes original style Firebird 4 leaf rear springs used on Formula 400 and some other high performance cars.
…
Reproduction Of Original BX Code This Camaro reproduction leaf sping tape decal has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the quality and appearence will work…
Reproduction Of Original BY Code This Camaro reproduction leaf spring tape decal has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the quality and appearence will work…
Mono-leaf rears use four T-bolts per side. Reproduction correct length T-bolt. 10 Bolt rears use eight T-Bolts. 12 bolt rears use four T-bolts and two U bolts. (Note: Racers may use four U-bolts for added strength).
7/16-20 X 1 1/4
…
Multi-leaf rears use one U-bolt (our Part # SS-23) per side and two T-bolts (our Part # RC-468) per side. Some restorers choose to use two U-bolts on either side for maximum strength. Mono-leaf rears use eight T-bolts.
…
Reproduction Of Original OH Code This Camaro reproduction leaf spring tape decal has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the quality and appearence will work…
Reproduction Of Original BH Code This Camaro reproduction leaf spring tape decal has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the quality and appearence will work…
Reproduction Of Original OA Code This Camaro reproduction leaf spring tape decal has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the quality and appearence will work…
Reproduction Of Original BK Code This Camaro reproduction leaf spring tape decal has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the quality and appearence will work…
OER® offers this complete rear leaf spring installation kit designed for use on 1970-81 various GM vehicles equipped with multi-leaf rear springs including 1970-81 Camaro and Firebird models. Each leaf spring installation set comes…
Reproduction of the original drivers side front leaf spring eye mounting bracket for use on 1967-69 F-body models. This uniquely shaped bracket provides the proper mounting point for the drivers side rear leaf spring. See part number…
Reproduction of the original bushings located on the forward eye of the rear leaf spring. This bushing is a commonly forgotten replacement part that is required when properly rebuilding the rear suspension. Sold individually. 2 required…
Reproduction of the original passenger side front leaf spring eye mounting bracket for use on 1967-69 F-body models. This uniquely shaped bracket provides the proper mounting point for the passenger side rear leaf spring. See part number…
OER® offers this complete rear leaf spring installation kit designed for use on 1967-74 various GM vehicles equipped with multi-leaf rear springs including 1967-1969 Camaro and Firebird models. Each leaf spring installation set comes…
Restoration Correct Show Correct Complete Four Piece Kit With Both Uppers And Lowers These Insolate The Leaf Spring From The Axle Sold As A Set Of Four Is your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 and 1981…
Sets come complete with rear shackles, U-bolts, upper and lower spring pads, spring eye bolts, and clips and screws for mounting. The 1967-70 shackle sets include the correct plates, bushings, bolts and nuts for authenticity. Sets are…
Correct Reproduction of Original Black Oxide Plated (6) Hex Head, Type CA Point Bolts With Captured Washer One Set Needed per Car Leaf Spring J-Nuts Available Separately As Our Part # RC-469 Here they are! These bolts are the ones which…