This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler Specs:
Shaft Size: 3/4" coarse spline with flat at bolt head side
Spline Count: 25
Total OD: 3-1/4"
Bolt Size: 5/16"
Bolt…
OER® Authorized reproduction of the original steering coupling joint for various models. This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler specifications:
Shaft size: 3/4" fine…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
Shaft size: 3/4" fine spline without flat at bolt head side
Spline count: 32
Total OD: 3-5/32"
Bolt size: 5/16"
Bolt spacing: 2-3/8" center to center
Pin diameter: 5/16" & 3/8"
Pin spacing: 2-1/2" center to…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…
Technically correct component and finish. Original GM for quality and safety. Used on all steering couplers. (Note: Tilt columns only use an additional bolt to fasten coupler flange to column).
…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…
Technically correct component and finish. Original GM for quality and safety. Used on all steering couplers. (Note: Tilt columns only use an additional bolt to fasten coupler flange to column).
…
OER® Authorized reproduction of the original steering coupling joint for various models. This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler Specs:
Shaft Size: 3/4" coarse spline with…
This steering column coupler commonly known as the rag joint can be a weak link between the steering column and the steering gear box. When the coupler becomes worn, it can lead to future problems with your steering system and expensive…
New column coupler flange used only on tilt columns. (Non-tilt columns have pressed on flange). Use special bolt {HR-31} to attach. (Bolt not included with flange)
…
Highest Quality Reproduction Steering Coupler For Cars With Power Steering Complete Assembly With Safety Straps Through Bolt Sold Separately Steering couplers are essential for your 1967, 1968 or 1969 Firebird's power steering conversion…
OER® Authorized reproduction steering coupler found on various models. Each coupler replicates the original in every detail. A worn out steering coupling joint will cause your vehicle's steering to become loose or…
Reproduction Of Original Joins Steering Column To Steering Box This Camaro reproduction steering shaft coupler assembly has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find…