The product you were looking for no longer exists! Here are products you may be interested in from the same category.
This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler Specs:
Shaft Size: 3/4" coarse spline with flat at bolt head side
Spline Count: 25
Total OD: 3-1/4"
Bolt Size: 5/16"
Bolt…
Quality Reproduction For Cars With Power Steering Complete Assembly With Safety Straps Through Bolt Sold Separately
Inside Diameter:- 13/16 Inch
…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…
New column coupler flange used only on tilt columns. (Non-tilt columns have pressed on flange). Use special bolt {HR-31} to attach. (Bolt not included with flange)
…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…
Correct 12 point bolt used on steering columns, steering couplers and steering flanges.…
Technically correct component and finish. Original GM for quality and safety. Used on all steering couplers. (Note: Tilt columns only use an additional bolt to fasten coupler flange to column).
…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…
Technically correct component and finish. Original GM for quality and safety. Used on all steering couplers. (Note: Tilt columns only use an additional bolt to fasten coupler flange to column).
…
OER® Authorized reproduction of the original steering coupling joint for various models. This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler specifications:
Shaft size: 3/4" fine…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
Dimensions are: 3 1/4" Outside Diameter, 1 5/16" Inside Diameter and 3/8" Thick
(2) Special Shouldered Bolts (2) Coupler Repair Bolts (1) Steering Coupler Repair Bushing Has an inexpensive solution to a broken or worn steering…
OER® Authorized reproduction of the original steering coupling joint for various models. This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler Specs:
Shaft Size: 3/4" coarse spline with…
This steering column coupler commonly known as the rag joint can be a weak link between the steering column and the steering gear box. When the coupler becomes worn, it can lead to future problems with your steering system and expensive…
Shaft size: 3/4" fine spline without flat at bolt head side
Spline count: 32
Total OD: 3-5/32"
Bolt size: 5/16"
Bolt spacing: 2-3/8" center to center
Pin diameter: 5/16" & 3/8"
Pin spacing: 2-1/2" center to…
Highest Quality Reproduction Steering Coupler For Cars With Power Steering Complete Assembly With Safety Straps Through Bolt Sold Separately Steering couplers are essential for your 1967, 1968 or 1969 Firebird's power steering conversion…
OER® Authorized reproduction steering coupler found on various models. Each coupler replicates the original in every detail. A worn out steering coupling joint will cause your vehicle's steering to become loose or…
Reproduction Of Original Joins Steering Column To Steering Box This Camaro reproduction steering shaft coupler assembly has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find…
Quality repair kit for application part numbers listed. (Note: Not manufactured with CHQ tooling)…
Technically correct special size and thread set for attaching steering coupler to steering column flange.…
Technically correct special size and thread set for attaching steering coupler to steering column flange.
…