877.589.9860 Contact Us Mon-Sat 10a-6p
PLACE YOUR CAMARO ORDER NOW
Select Your Vehicle to Shop for the Correct Parts:
Show More Filters
Sort by
Show
Show results for
Refine By
Availability
On Sale
Condition
Price
Manufacturer
Show Less Filters
Camaro Hood Adjustment Bolt & Nut Set, 1967-1972
Model: 2030021
Condition: NEW
This kit attaches to the core support and barely touches the bottom of your Camaro hood to keep it in place. As your Camaro rolls down the road, the hood is constanly moving side to side and front to back on the hood hinges. When topped…
Classic Headquarters Hood Hinge Spring 9 3/8" W-759
Model: 2033134
Condition: NEW
With classic Chevrolet and Pontiacs between the early 1960s and early 1970s, there is definitely a compulsion by enthusiasts to open the hood. Chevrolet’s small block and big block V8 engine families as well as Pontiac’s 400 powerplant…
Classic Headquarters Rear Hood Adjusters / Safety Stops R-400
Model: 3146365
Condition: NEW
Accurate reproduction. Hardened bolts and jamb nuts with rubber bumpers provide adjustment for rear hood height and as a safety catch for hood hinges in the event of a hard front end crash. These bolts properly adjusted will lock into the…
Camaro Hood Hinge Spring, For Cowl Induction Or Super Sport Hoods, 1967-1969
Model: 4019387
Condition: NEW
Reproduction of Original Correct for Super Sport & Cowl Induction Hood (Functions Perfectly with All Steel Hoods) 28 Coils 9 3/8 Long End to End Spring Steel Plated Dull Black Finish Sold Each Two Required Per Car The original hood…
Camaro Hood Latch Spring, 1967-1981
Model: 2030102
Condition: NEW
Reproduction Hood Lock Spring Stainless Steel Finish Replaces GM #3857882 In order to make your hood latch release assembly work properly in your 1967-1981 Camaro, you'll need a new hood safety latch spring. Coming in a stainless steel…
Camaro Hood Latch Release Support Bracket, 1967-1968
Model: 2028922
Condition: NEW
Accurate Reproduction Of Original Heavy Weight Stamped Steel Black EPD Coated To Ensure Rust Prevention Mounts Under Hood Catch Mechanism For 1967-1968 1st Gen Standard Or Rally Sport Camaros The hood latch release support bracket is…
Classic Headquarters Trunk Latch Mounting Bolt Set H-143
Model: 3927700
Condition: NEW
Correct mounting bolts for trunk latch assembly, with correct integral serrated washers.…
Classic Headquarters Hood Stop Bolts with Nuts-Pair W-401
Model: 4019198
Condition: NEW
Hood bumper stops can extend the life of your hood while reducing the impact of shutting the hood closed. With the help of the Hood Stop Bolts and Nuts secure your hood stop in place and ensure the longevity of your vehicle’s…
Camaro Hood Latch Release Support Bracket, 1969
Model: 3447841
Condition: NEW
Accurate Reproduction Of Original Heavy Weight Stamping Like Original Black EPD Coated To Ensure Rust Prevention Mounts Under Hood Catch Mechanism For Standard Or Rally Sport Replaces GM #3937531 The hood latch release support bracket is…
Classic Headquarters F Body Right Hand 1/4 Paneltrunk Opening Corner Stiffener W-975R
Model: 2034317
Condition: NEW
Accuate reproduction of original quarter panel stiffener. Commonly destroyed during 1/4 panel removal or missing from previous repair. Stiffener is welded to quarter panel on the underside of the trunk lid opening. This panel is for coupes…
$42.99 ea $34.00
20.9%
Classic Headquarters Rear Bumper Body Brace-Right Hand and Left Hand-Pair W-637
Model: 2032629
Condition: NEW
Braces extend from the rear trunk floor pan to mate against the inside of the tailpan at the inner bumper mounting points. Original gauge, die stamped. Coated black. RH and LH pair.GM Part # RH 8748970, LH 8748971…
$47.99 ea $33.95
29.3%
Camaro Hood Latch Release, Fits All (Non-Rally Sport Or Rally Sport RS), 1969
Model: 4019211
Condition: NEW
Best Quality Reproduction Hood Opening Mechanism Officially Licensed GM Restoration Part Fits All 69 Camaros With Flat, SS or Cowl Induction Hoods Correct Factory Gauge Metal Dark Gray Phosphate Plating As Original This Hood Latch Release…
$148.99 ea $123.28
17.3%
Classic Headquarters F-Body Center Hood Adjuster Kit R-401
Model: 3223725
Condition: NEW
Correct reproduction center hood support kit. Center hood adjuster is required for all F-body cars equipped with hidden wipers. Adjuster kit keeps proper clearance for wipers to retract below hood edge. GM Part #: bolt 3963260, jamb nut…
Classic Headquarters Camaro Hood Safety Latch, Pre-Assembled W-829
Model: 2031162
Condition: NEW
Accurate reproduction from new proprietary tooling in 2009. Hood safety latch is properly pre-assembled for easy installation. Assembly includes lock plate, pilot bolt, spring, retainer and jamb nut packaged with a color logo header card…
Classic Headquarters F Body Right Hand, Rear Quarter Inner Lower Half Patch W-956
Model: 2034052
Condition: NEW
Accurately stamped repair panel for the lower half of the inner body panel the rear window regulator mounts to. Repairs commonly rusted area at floor and rocker panel area. Black EDP coated. 9-1/2" tall. RH (passenger) side only. Panel…
Classic Headquarters F Body Left Hand, Rear Quarter Inner Lower Half Patch W-957
Model: 2034053
Condition: NEW
Accurately stamped repair panel for the lower half of the inner body panel the rear window regulator mounts to. Repairs commonly rusted area at floor and rocker panel area. Black EDP coated. 9-1/2" tall. LH (driver) side only. Panel…
Classic Headquarters F Body Trunk Gutter Set Pieces W-965
Model: 2038753
Condition: NEW
Accurate reproductions of original gutter edge molding to finish out both quarters, allowing the installation of trunk weatherstrip. Needed on original and all reproduction full and 80% quarters or for repair of rusted originals. Side…
Classic Headquarters F Body Quarter Window Rear Corner Filler Panel, Coupe, Pair W-654
Model: 2034245
Condition: NEW
Accurate reproductions of original quarter panel reinforcement. Commonly destroyed during 1/4 panel removal or missing from previous repair. Brace supports the edge of the quarter panel where the window felt attaches. It is very common for…
Classic Headquarters F Body Right Hand, Front Lower Door Jamb Patch W-958
Model: 2034065
Condition: NEW
New product for 2008. Accurately stamped repair panel for the front lower 1969 door jamb area at the lower door hinge. (just modify hinge bolt holes for 67 and 68) Repairs commonly rusted area at the front of the rocker panel and behind…
Classic Headquarters Trunk Latch Assembly W-029
Model: 2040438
Condition: NEW
Not mass market generic item. Accurate reproduction stamped from new tooling. Silver cadmium plated truck latch. Fits almost all 59-72 GM cars. Group 12.242 GM Part # 4753019…
Classic Headquarters 1970-73 Camaro R/S Hood Release Assembly W-535
Model: 2038698
Condition: NEW
First time available, superior quality. Correct gauge, dark gray phosphate plating . This hood catch release mechanism fits 70-73 rallysport camaros (round parking lights above the front bumper.) Officially Licensed GM Restoration Parts…
Classic Headquarters Camaro Front Bumper Filler Panels-Pair W-596
Model: 2037557
Condition: NEW
Die Stamped original heavy gauge steel panels replace often corroded or missing originals exactly. Standard or Rallysport. EDP coated. RH and LH pair.…
Classic Headquarters F Body Left Hand, Front Lower Door Jamb Patch W-959
Model: 2034066
Condition: NEW
New product for 2008. Accurately stamped repair panel for the front lower 1969 door jamb area at the lower door hinge. (just modify hinge bolt holes for 67 and 68) Repairs commonly rusted area at the front of the rocker panel and behind…
Camaro Trunk Weatherstripping Channel Repair Kit, 1967-1969
Model: 3446600
Condition: NEW
Reproduction Of Original Fits Coupe & Convertible Trunk Weatherstrip Fits In This Channel Needed For New Quarters & Rear Window To Trunk Panel Replace Old Rusty Pieces This Camaro reproduction trunk weatherstripping channel repair…
Classic Headquarters Rear Bumpr Body Brace Right Hand/Left Hand Each W-638
Model: 2032536
Condition: NEW
Brace extends from the rear trunk floor pan to mate against the inside of the tailpan at the rear bumper mounting points. Original gauge die stamped steel. Fits RH or LH side. Coated black. Each…
Classic Headquarters F Body Floor Tunnel Panel W-832
Model: 2032732
Condition: NEW
Die stamped original gauge repair panel for commonly damaged floor tunnel humps at the shifter location. Accurate stamping. EDP coated. Overall size: 19-1/2" Length, 6" Height.…
Classic Headquarters Rear Bumper Body Brace-Small-Pair W-639
Model: 2032630
Condition: NEW
Braces extend from the trunk floor outer corners to mate against the inside of each quarter panel at the outer bumper mounting points. Original gauge, die stamped. Coated black. RH and LH pair.…
Classic Headquarters Grille Support Bracket-Heavy W-218
Model: 4019102
Condition: NEW
Accurate heavy weight reproduction stamping, EPD coated. Unlike other's 'lightweights', ours are stamped from original gauge steel. Located under the hood release.…
Camaro Hood Latch Release, Rally Sport (RS), Show Correct, 1967-1968
Model: 3448570
Condition: NEW
Show Correct Reproduction Camaro Hood Latch Release Officially Licensed GM Restoration Part Correct Gauge Metal Dark Gray Phosphate Plating As Original No Manufacturer Embossing For RS Camaro Models If you need a new hood latch release…
Classic Headquarters F Body Left Hand 1/4 Paneltrunk Opening Corner Stiffener W-975L
Model: 2034319
Condition: NEW
Accuate reproduction of original quarter panel stiffener. Commonly destroyed during 1/4 panel removal or missing from previous repair. Stiffener is welded to quarter panel on the underside of the trunk lid opening. This panel is for coupes…
Classic Headquarters F Body 1/4 Panel Trunk Opening Corner Stiffener Coupe, Left Hand W-976L
Model: 2034321
Condition: NEW
Accurate reproduction commonly destroyed during quarter panel removal or missing from previous repair. Stiffener is welded to quarter panel on the underside of trunk lid opening. GM PART# 7779487 LH…
Classic Headquarters F Body 1/4 Panel Trunk Opening Corner Stiffener Coupe, Right Hand W-976R
Model: 2034320
Condition: NEW
Accurate reproduction commonly destroyed during quarter panel removal or missing from previous repair. Stiffener is welded to quarter panel on the underside of trunk lid opening. GM PART# 7779486 69 RH…
Camaro Hood Latch Release, For Cars With Standard Trim (Non-Rally Sport), 1967
Model: 2030106
Condition: NEW
Superior Quality Reproduction Officially Licensed GM Restoration Part Correct Gauge Dark Gray Phosphate Plating No Manufacturer Embossing Replaces GM #3891606 If you need a new hood latch release mechanism for your 1967 Camaro, look no…
Classic Headquarters Camaro Hood Release Assembly W-433
Model: 2030107
Condition: NEW
Superior quality to the others available. Correct gauge, dark gray phosphate plating, no manufacturer embossing. Finest available at no extra cost! Officially Licensed GM Restoration Parts…
Classic Headquarters Camaro Hood Catch Release Assembly W-432
Model: 2030109
Condition: NEW
Superior quality to the others available. Correct gauge, dark gray phosphate plating, no manufacturer embossing. Finest available at no extra cost! Officially Licensed GM Restoration Parts GM Part number 3947609…
Classic Headquarters F Body Trunk Gutter Set (3 Pcs) W-964
Model: 4019476
Condition: NEW
Accurate reproductions of original gutter edge molding to finish out both quarters and rear window to trunk panel allowing the installation of trunk weatherstrip. Needed on original and all reproduction full and 80% quarters or for repair…
Camaro Depot 2024