The basic function of opening or closing the window with your classic General Motors F body sports car is an amenity many of us would take for granted. After years of use and movement, the mechanism depended upon for the task will wear out…
A must when replacing door glass, often so brittle it can be removed but not re-installed. This hard plastic bumper is required for proper door glass alignment. Group 10.685 GM part #: 9833748…
Exact reproduction cast metal stops limit the travel of the RH or LH door glass. stops fasten to the rearward door glass window track. Mounting hardware is not included. Group 10.716 GM Part # 7731540 RH, 7731541 LH…
Two required per door glass. Stud bolt, nylon bushing and backing washers and special steel washer nut. Use to mount the lower window glass sash channel to door glass.…
The metal is plated and each end has the rubber coating just like the factory installed. Don't take a chance on hitting your window with just metal, replace the stops with this rubber end window stop.
…
Best Quality Reproduction Firebird Door Window Stop Plated, Stamped Steel Black Rubber Coated Tip One Required Per Door For Forward Position Stop Fits Left Or Right Side The 1968 & 1969 Firebird door is very inhospitable to metal parts…
Two required per door glass. Stud bolt with hex head, nylon bushing and backing washers and special steel washer nut. use to mount the lower glass sash channel to door glass. Packaged with a color logo header card. GM Part #'s: Stud…
Reproduction Of Original 1 Required Per Door Glass This Firebird reproduction door glass stop bumper assembly has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit…
Reproduction door glass roller for 1970-81 models. It is located at the front portion of the door glass and installs it in the front track channel. This roller travels up and down the channel as the window regulator mechanism is…
Faithful reproduction hardware set for retaining; rear of door glass to window track assembly. Unique flat head bolt includes serrations as original, to keep from spinning while tightening nut, correct domed washer nut, plastic washer and…
Correct window guide roller for use with all 1970-81models. Installs on the rear section of the window. Helps the window to roll up and down smoothly. Can be used with either RH or LH door. Measures: 1" dia. roller, 5/16" thickness of…
A (1) RH Door glass front and rear mount plate set
A (1) LH Door glass front and rear mount plate set
B (2) Door glass plate gasket sets
C (6) Front and rear glass plate mount stud assy
D (2) Rear glass plate mount and nut
E…
Accurate reproductions. Each set includes front and rear door glass mounting plate with roller assembly exactly as original. Front rubber bumper stop included. Galvanized as original.…
New proprietary tooling for 2015. Exact reproduction door glass track, includes (often missing or broken) rear door glass roller, plastic front track guide and special glass mounting rubber “u” channel; with integral gripping spine as…
Excellent Quality Reproduction
Includes Left & Right Tracks With Rear Roller & Front Plastic Guide
Rubber Glass Setting Channels
Black EDP Coated
Fits All Models Including Convertible
Pair of window…
Reproduction of the correct rubber stop bumper for 1982-92 models. Designed to keep the door glass from rolling down beyond the required point. Used for the down position on the cam. Sold individually. 2 required per vehicle. …
Accurate reproductions. Each set includes front and rear door glass mounting plate with roller assembly exactly as original. Front rubber bumper stop included. Galvanized as original.…