The legendary B&M transmissions for street use are a complete ready to run unit (less converter) for high performance street and mild strip use. The Street/Strip GM 4L60E is a must have for those wanting a high performance overdrive transmission. The years of experience and skills that B&M has gained at the track have been applied to these transmissions. Several parts have been replaced to assure optimal performance including replacing the factory friction plates with high performance friction plates, a re-calibrated valve body, Beast Sunshell, reinforced input drum, all new solenoids, wiring harness along with a rebuilt performance pump to assure optimum flow rate even in demanding conditions. A chrome transmission pan is installed to contain the fluid, but is aesthetically pleasing as well. The list goes on and on, which makes the Street/Strip GM 4L60E transmissions a very desirable unit. The transmission provides firm shifts and features a standard shift pattern, these are the finest available for street and strip use. Notes: We strongly recommend protecting your investment by adding a B&M Hi-Tek SuperCooler with all new transmission installations. Max 550 HP / 450 Ft/Lbs.
Features:
- Includes Chrome Standard Depth Transmission Pan
- 8 Count 3-4 Friction Pack with Koleen Steels
- All New High Performance Friction Plates
- All New Solenoids & Wiring Harness
- Billet Corvette 4th Gear Servo
- Fully Re-calibrated Valve Body
- 29 Element Dual Cage Sprag
- Heavy Duty Beast Sunshell
- Seven Hole LS Bellhousing
- Reinforced Input Drum
- Forward Shift Pattern
Fits 1998-2006 GM 4L60E (Electronic Shift Model) for LS Engines, 2-Wheel Drive. Does not replace 4L60 (manual shift model). Transmission shipped without speedometer drive gear.
Installation Notes:
Fits 1998-2006 GM 4L60E (Electronic Shift Model) for LS Engines, 2-Wheel Drive. Does not replace 4L60 (manual shift model). Transmission shipped without speedometer drive gear.
About B&M Racing
B&M® specializes in performance automatic transmissions, torque converters, SFI approved flexplates, legendary automatic shifters, precision manual shifters, and many other transmission products including cast deep aluminum transmission pans, transmission coolers, and automatic transmission fluid. B&M Performance & Off-Road has been at the vanguard of the growing automotive aftermarket since the early 1950s. Racers themselves, B&M’s founders identified the needs of local performance enthusiasts and developed products to fill those needs. B&M specializes in performance automatic transmissions, torque converters, SFI approved flexplates, legendary automatic shifters, precision manual shifters, automatic shift handles, extended transfer case handles, cast deep aluminum transmission pans, differential covers, transmission coolers, power steering coolers, automatic transmission fluid, and transmission accessories for performance street, truck, Jeep, and off-road applications.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make |
Model |
Years |
Engine |
Chevrolet |
Camaro |
1998 |
5.7L / 350 / V8 |
Chevrolet |
Camaro |
1999 |
5.7L / 350 / V8 |
Chevrolet |
Camaro |
2000 |
5.7L / 350 / V8 |
Chevrolet |
Camaro |
2001 |
5.7L / 350 / V8 |
Chevrolet |
Camaro |
2002 |
5.7L / 350 / V8 |
Pontiac |
Firebird |
1998 |
5.7L / 350 / V8 |
Pontiac |
Firebird |
1999 |
5.7L / 350 / V8 |
Pontiac |
Firebird |
2000 |
5.7L / 350 / V8 |
Pontiac |
Firebird |
2001 |
5.7L / 350 / V8 |
Pontiac |
Firebird |
2002 |
5.7L / 350 / V8 |